硫酸铵法利用中低品位锂瓷土矿制备碳酸锂技术研究

针对江西宜丰地区氧化锂质量分数<2.0%以下中低品位锂瓷土矿,研究了硫酸铵法提取碳酸锂技术路线。首先,利用二步焙烧工艺,有利于脱氟、提高锂浸出率,并且能够有效防止结窑现象发生。在浸出液除杂过程中,采用成矾除铝的方法将大量溶出的铝离子转变为KAl（SO₄）₂·12H₂O、NH₄Al（SO₄）₂·12H₂O等有价值复盐,规避了传统石膏法产生的大量固废,有70%的铝离子被转变为矾盐晶体,同时带出大量的结晶水,减轻后续浓缩压力,对比传统的石膏法产生大量固废而言,其优点是显而易见的。碳化反应产品的XRD以及氧化锂含量分析表明,碳酸锂的纯度达到99%以上,全程锂收率为50%~60%。作为提锂实验对比,采用宜春414矿锂质量分数为4.0%的锂云母,由于414矿样中铝的相对含量更低,导致相同的除杂难度下得到的414矿样中浸出液锂离子浓度更高,浓缩倍数更小,414矿样的锂回收率更高。实验结果表明,中低品位锂瓷土提锂的工艺规律,通过适当改变参数,能够应用于难度更低的高品位的锂云母提锂过程。     

卡尔费休法测定液态氯乙烯中水含量的研究

采用卡尔费休法测定了液态氯乙烯单体中的水含量。试验确定了采样工具、样品的预处理方式及选用溶剂的最优方案,并进行了精密度与准确度的验证。结果表明卡尔费休法测定液态氯乙烯单体中的水含量准确、快速,可以用来准确、及时地指导生产。     

超声微波耦合制备P(AM-DMC-BA)及其污泥脱水研究

以丙烯酰胺(AM)为主单体、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为阳离子单体、丙烯酸丁酯(BA)为疏水单体,偶氮二异丁脒盐酸盐(V-50)为引发剂,通过微波和超声耦合技术合成新型高效阳离子共聚物絮凝剂P(AM-DMC-BA)。考察了原料对P(AM-DMC-BA)特性黏度及转化率的影响,P(AM-DMC-BA)对其进行了表征,并用于污泥脱水实验。结果表明,当单体AM、DMC、BA的质量分数分别为22.5%、7.5%、1%,引发剂V-50的质量分数为2%,尿素的质量分数为1.2%,聚合体系pH为3.5,制得的P(AM-DMC-BA)的特性黏度及转化率最高。当共聚物投加量为45 mg/L、污泥溶液pH为7时,其对污泥有较好的脱水性能,且具有良好的pH抗性。     

氯化镧对镁合金表面疏水化处理的影响

研究了氯化镧对镁合金疏水膜耐蚀性的影响。采用中性盐雾试验和电化学试验测试了疏水膜的耐蚀性,并采用扫描电子显微镜观察了疏水膜的表面形貌。结果表明:氯化镧对镁合金疏水膜有一定的改性作用,使膜层由乳突状结构转变为层片状结构,进而使膜层由疏水表面转变为超疏水表面,其接触角可达153°。另外,添加氯化镧后疏水膜的盐雾时间延长至109.0 h,耐蚀性大幅提高。     

Drag Reduction by Wormlike Micelles of a Biodegradable and Non-Biodegradable Surfactants

This study describes the effects of wormlike micelles formed by the commercial surfactants tallowalkylamidopropyl dimethylamine oxide (Aromox APA-TW) and oleyl methyl bis(2-hydroxyethyl) ammonium chloride (Ethoquad O/12) as drag reducers. Ethoquad O/12 is immune to degradation by heat and microorganisms. Conversely, Aromox APA-TW is biodegradable in the environment, and its susceptibility to heat-induced degradation was previously assessed. This work considers the effects of temperature, salt, and time on the drag-reduction capacity (in different Reynolds number) of wormlike micelles of these two surfactants. Wormlike micelles formed by Aromox APA-TW are able to reduce drag at higher temperatures compared to wormlike micelles formed by Ethoquad O/12. However, Aromox APA-TW can degrade after being heated to 80 °C and also after storage of the wormlike micelle solutions. Ethoquad O/12 does not undergo degradation after being heated or stored. These surfactants have the potential to be used as additives in industrial operations, as the wormlike micelles formed are able to reduce drag in systems with long pumping distances or recirculation, even in solutions with high salt concentrations (brine) and high temperatures.     

Inferring kinetic dissolution of NaCl in aqueous glycol solution using a low-cost apparatus and population balance model

An experimental methodology for inferring brine dissolution rate in monoethylene glycol (MEG) solutions at different temperatures using a webcam combined with a mathematical model is presented. The measurement system is designed to track the RGB (red, green, and blue) colour variations during the dissolution process. A dynamic model augmented with the population balance equation is applied to describe the dissolution process. Moreover, the dissolution rate is consistently related to the temperature and MEG concentration through the driving force based on the Gibbs energy and chemical affinity. The applied low-cost measurement apparatus proved to be a useful resource for tracking the dissolution dynamics in a wide range of undersaturation.     

Investigation on the effectiveness of the repair method 8.3 “Corrosion protection by increasing the electrical resistivity” in chloride-containing concrete Part 2: Chloride redistribution in concrete after application of a system sealing surface protective coating

This DFG-funded research project aimed to gain a better understanding of the mechanisms of the W-Cl repair principle within the framework of fundamental investigations, to contribute to the creation of the necessary basis for a broader application of the repair principle in practice. The focus was on the development of a model to describe the chloride redistribution after the application of a system sealing surface protective coating. On the basis of Fick's second law of diffusion, a mathematical model with a self-contained analytical solution was developed, with the help of which the chloride redistribution after application of a system sealing surface protective coating can be calculated under the idealized assumption of complete water saturation of the concrete. Furthermore, the influence of the dehydration of the concrete, expected as a result of the application of the repair principle W-Cl, on the chloride redistribution was investigated. On the basis of laboratory tests and numerical simulations, material-specific reduction functions were developed to quantify the relationship between the chloride diffusion coefficient and the ambient humidity.     

TG-FTIR and Py-GC/MS study of the pyrolysis mechanism and composition of volatiles from flash pyrolysis of PVC

To facilitate the reuse and recycling of polyvinyl chloride (PVC) to achieve sustainable development and new industrialization, the composition and mechanism of formation of volatiles during the flash pyrolysis of PVC were studied by thermogravimetry-Fourier transform infrared (TG-FTIR) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). TG and derivative thermogravimetry (DTG) analyses indicated two main degradation stages during flash pyrolysis of PVC, namely dehydrochlorination of PVC and decomposition of dechlorinated-PVC. Simultaneously, the FTIR results revealed that the main functional groups in the pyrolysis process were H–Cl, -C-Cl, C–H, CH, and aromatic groups. The relative content of main volatiles was determined by Py-GC/MS, and decreased in the following order: aromatics > alkenes > hydrogen chloride (HCl) > chlorinated hydrocarbons. Specifically, the relative content of aromatics was as high as 76.790–81.809%, while that of HCl was in the range of 3.016–3.096%. The carbon number distribution and the relative content of main products obtained from the flash pyrolysis of PVC at different final temperatures were also analysed. According to the experimental results, the mechanism of formation of the main volatiles based on free-radical reactions was deduced in detail. Therefore, this study provides further details for deepening the understanding of the PVC pyrolysis process.     

氯化氢过氯原因及预防措施

分析了合成氯化氢中游离氯含量超标的原因,为避免发生安全生产事故,提出了预防措施。     

A Biomimetic Hybrid Hydrogel Based on the Interactions between Amino Hydroxyapatite and Gelatin/Gellan Gum

In this work, a gelatin (Gel)‐oxidized gellan gum (OG)/amino hydroxyapatite (mHap) hybrid hydrogel with Schiff base linkages is reported. The mHap is obtained by modifying hydroxyapatite with tetraethyl orthosilicate and 3‐aminopropyl‐triethoxysilane. The effects of different mHap contents on the structure, morphology, and properties of hydrogels are particularly investigated. Scanning electron microscopy coupled with energy dispersion spectroscopy reveals that mHap of around 100 nm is uniformly distributed inside the hydrogel with interconnected porous structures. Notably, the hydrogel with 1 wt% mHap possesses the highest compressive stress (2.01 ± 0.10 MPa) at 90% strain, as well as the lowest equilibrium swelling ratio (97% ± 5%) and degradation rate than other hydrogels. Besides, an ultra‐high compressive stress equivalent to 91% of the initial stress can be obtained by this hydrogel after 50 loading‐unloading cycles (85% strain). Meanwhile, after being swollen, this improved hydrogel also exhibits better structural stability than Gel‐OG hydrogel. The in vitro 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay further shows that all hydrogels are nontoxic against mouse fibroblasts. This work provides a biomimetic strategy to construct the organic/inorganic hydrogels with excellent interactions, elasticity, reversibility, and biocompatibility, which is of great importance for the practical applications in cartilage tissue engineering.